Product ID:SATINHIDE ALKYD LO-LUSTRE-MIDTONE BASE, 20-150
MSDS Date:09/13/1991
FSC:8010
NIIN:00N025490
MSDS Number: CBBNN

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

1); (CALCIUM CARBONATE)

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 10-20%

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL SPIRITS; (HYDROTREATED HEAVY NAPHTHA)

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 30-35%

OSHA PEL N/K

ACGIH TLV: N/K

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 15-20%

OSHA PEL N/K

ACGIH TLV: N/K

LIMIT, AND TO REMOVE DECOMPOSITION PRODUCTS DURING

RTECS: 9999999ZZ

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IN
SWALLOWED. EYE: IRRIT. SKIN: MAY CAUSE MOD IRRIT. INHAL: VAP &
SPRAY MIST MAY BE HARMFUL IF INHALED. REDNESS, ITCH, BURNING
SENSATION & VISUAL DISTURB MAY INDICATE EXCE SS EYE CONT. DRYNESS,
ITCH, CRACKING, BURNING, REDNESS & SWELL ARE CNDTNS ASSOC W/EXCESS
SKIN CONT. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CHRONIC: AVOID LONG TERM & RPTD CONT.
ANIMALS INHALING MASSIVE QTYS OF TITANIUM DIOXIDE DUST IN LONG-TERM
STUDY DEVEL LUNG TUMORS. POTENTIAL FOR INHAL OF TITANIUM DIOXIDE
DUSTS FROM COATINGS IS VERY LIM. SINCE OVEREXP ARE NOT EXPECTED,
THERE IS NO SIGNIFICANT HAZ FOR MAN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
WATER FOR AT LEAST 15 MIN. SKIN: REMOVE PROMPTLY BY WIPING,
FOLLOWED BY WATERLESS HAND CLEANER & SOAP & WATER. INHAL: REMOVE TO
FRESH AIR. APP LY ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQ. IF
INGEST, ANY TYPE OF OVEREXP/SYMP OF OVEREXP OCCUR DURING/FOLLOWING
USE OF THIS PROD, CONT POIS CTL CTR, EMER ROOM/MD IMMED. HAVE MSDS
INFO AVAIL.

Flash Point Method:PMCC
Flash Point:120F,49C
Lower Limits:0.7%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUP DAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFFECTIVE, MAY BE USED TO COOL CLSD CONTRS
TO PVNT PRESS BUILD-UP & POSS (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & OPEN FLAMES. CLSD CONTRS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY ON (SUP DAT)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERSONNEL EQUIPPED
W/PROPER RESPIRATORY, SKIN & EYE PROTECTION SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNITION. TAKE UP SPILLED MATL
W/SAWDUST, VERMICULITE/OTHER ABS ORBENT MATERIAL & PLACE INTO
CONTRS FORDISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
READ MSDS FOR OTHER COMPONENT(S) BEFORE BLENDING AS RSLT MIX MAY
HAVE HAZ OF ALL OF ITS PARTS. CONTRS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FAL L OF LIQS IN EXCESS OF FEW INCHES.

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE SUITABLE
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP CONC < LOWEST SUGGESTED EXPOS LIM, LEL < STATED (ING 5)
Protective Gloves:NITRILE RUBBER OR NEOPRENE RUBBER.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:WEAR IMPERMEABLE APRON. EMERGENCY EYEWASH &
DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA: CLASS II COMBUST LIQ FIRES. FIRE FIGHT PROC:
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER USED, FOG
NOZZ ARE PREFERABLE. EXPLO HAZ: HOT SURF. TOX GASES MAY FORM WHEN
PROD IS CO NT BY FLAME/HOT SURF. HAZ DECOMP PROD: FUMES INCL CARBON
MONOXIDE.

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:0.6
Vapor Density:HVR/AIR
Spec Gravity:1.24
Evaporation Rate & Reference:11 (BUTYL ACETATE=100)
Solubility in Water:0.0%
Appearance and Odor:VISCOUS LIQUID, W/AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED IN INGS SECTION
Percent Volatiles by Volume:56.70

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PROD WHEN HEATED.
WELDING, BRAZING/FLAME-CUTTING ON SURF COATED W/THIS PROD MAY PRDCE
(SUP DAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, AND LOCAL ENVIRONMENTAL REGULATIONS. EMPTY
CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED
WASTE MANAGEMENT FACIL ITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.